Overview

This 3” (80mm) ceramic hybrid pad is designed for the “transition zone” after metal grinding—especially on very hard / dense concrete where regular resin pads can struggle. It gives you a faster scratch clean-up and a smoother handoff into resin polishing.

Best for

• Very hard / dense concrete (high PSI, burnished slabs)

• Metal scratch refinement after 30/40/60/80 metal steps

• Removing metal “shadow” scratches before resin polishing

• Small-to-medium areas, edges, tight rooms

Features

• 3” / 80mm compact format for control and pressure

• Ceramic hybrid matrix: sharper cut + steadier finish on hard slabs

• Works as a bridge step (metal → hybrid → resin)

• Recommended grit options (variants): 30 / 50 / 100 / 200 / 400 (adjust to your actual SKU list)

• Wet or dry use (wet = cooler + longer life; dry = faster with good vacuum)

Fitment

• For 3” (80mm) pad holders / backing plates that accept 3” round pads

• Hook & loop (Velcro) or mechanical holder depending on your setup

• If you’re unsure, match by pad diameter (80mm) + your holder type

Shipping

Dispatch: 3–5 business days. US delivery typically ~1 week via UPS/FedEx (tax-included route).

FAQ

Q1: What does “ceramic hybrid” mean here?

It’s a transition pad built to cut more aggressively than typical resin, so it removes metal scratches faster—especially on hard concrete.

Q2: Where does it fit in my grit sequence?

Common flow: Metal → Ceramic Hybrid (30/50/100) → Resin (100/200/400/800/1500/3000).

If you still see heavy metal scratches, start lower (30/50).

Q3: Can I skip it and go straight to resin pads?

On softer concrete you often can. On very hard concrete, skipping the transition step usually means slower polishing and leftover scratches.

Q4: Wet or dry?

Both work. Wet runs cooler and extends life. Dry is fine with strong dust control to avoid glazing.